Description

This module will provide you with a safety feature that is often mandatory on commercial vessels as it can be a life saver: Detecting traces of explosive gases as soon as possible will allow the crew to find the source and eliminate the threat early enough to prevent a disaster.

There can be several of these modules installed in different areas of the boat: near the galley, in the bilge above the high water level, in the salon or in the gas locker itself.

You can view the historical data all the way back from when you first turned the system on. That way you can see the short and long-term changes in a nice graphical form.

What differentiates this sensor is that the user can modify the threshold and hence the sensitivity before the notification or an alarm is being triggered by the system. Rather than turning the annoying EG sensors off completely after a number of false alarms, these can be avoided by adjusting the thresholds in the web interface. Furthermore, these values can be set on a per module basis, since the sensor in the gas locker would require a much lower sensitivity than the one in the sleeping quarters.

To prevent abuse, only an authenticated user can modify these values.

This package contains one EG (explosive gas) sensor module. You can add more modules now or at any later point in time.